PRRH0175型自动柴油氧化安定性测定仪 PRRH0175 automatic diesel oxidation stability tester__产品展示

产品类别 Product category

联系我们 contact us

电话：: 13944694406

电话：: 0432-66180758

传真：: prtlz@163.com

地址：: 吉林市昌邑区西山街199号吉林兰天国际商贸中心9号商铺0单元1至3层015号

产品展示 products

当前位置：首页 > 产品展示 > 氧化安定性系列 ...

PRRH0175型自动柴油氧化安定性测定仪 PRRH0175 automatic diesel oxidation stability tester

添加时间：2024-05-14

本产品按照SH/T0175馏分燃料油氧化安定性测定法（加速法）的标准要求设计制造的。Designed and manufactured according to SH/T0175 Test Method for Oxidation Stability of D ...

PRRH0175型自动柴油氧化安定性测定仪

执行标准：按照SH/T0175馏分燃料油氧化安定性测定法（加速法）的标准要求设计制造的。

适用范围：适用于在加速氧化条件下中间馏分燃料油固有安定性能的测定。方法概要：将已过滤的350ml试样，在通入氧气连续鼓泡和95℃温度下老化16小时，老化结束经冷却后，测定试样形成的总不溶物含量，以mg/100ml表示。

性能特点：本仪器由加热水浴，冷却暗箱，控制系统组成。全不锈钢结构，耐腐蚀。单片机控制系统，控制全过程，达到"免看守"状态。水位自动保护系统，保证实验中的水位高度。能自动完成注入、恒温、冷却、氧化过程、报警、全程监测等工作，操作人员可以在"启动——免看守"的操作模式下工作，完成标准规定的氧化——冷却全过程。具有故障诊断功能，一旦出现故障，立即自动报警，仪器自动采取安全保护措施。其功能有恒温浴超温保护、恒温浴水位保护、加热器保护等，为仪器的安全操作提供了可靠保证。本仪器设计独特、自动化程度高、操作简便等特点。

技术参数：
1. 试验孔位：6孔
2. 恒温控制点：95℃±0.2℃
3. 氧化时间：16h±0.2h
4. 冷却时间：4 h
5. 氧气流量：50±5ml/min
6. 加热功率：2700w
7. 环境温度：5～40℃
8. 湿　　度：≤85%
9. 工作电源：AC220V±10%　50Hz

PRRH0175 automatic diesel oxidation stability tester

Executive standard: designed and manufactured according to SH/T0175 Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method).

Scope of application: applicable to the determination of inherent stability of intermediate distillate fuel oil under accelerated oxidation conditions. Method summary: The filtered 350ml sample was subjected to continuous bubbling with oxygen and aging at 95 ℃ for 16 hours. After the aging and cooling, the total insoluble content of the sample was measured, expressed in mg/100ml.

Performance characteristics: the instrument is composed of heated water bath, cooling chamber and control system. All stainless steel construction, corrosion resistant. Single-chip microcomputer control system controls the whole process to achieve "guard free" status. Automatic water level protection system to ensure the water level in the experiment. It can automatically complete the injection, constant temperature, cooling, oxidation process, alarm, whole-process monitoring and other work. The operator can work in the operation mode of "start - no guard" to complete the whole process of oxidation - cooling specified in the standard. It has fault diagnosis function. Once a fault occurs, it will automatically alarm and the instrument will automatically take safety protection measures. Its functions include thermostatic bath over-temperature protection, thermostatic bath water level protection, heater protection, etc., providing reliable guarantee for safe operation of the instrument. This instrument is characterized by unique design, high degree of automation and easy operation.

Technical parameters:

Test hole location: 6 holes

Constant temperature control point: 95 ℃± 0.2 ℃

Oxidation time: 16h ± 0.2h

Cooling time: 4 h

Oxygen flow: 50 ± 5ml/min

Heating power: 2700w

Ambient temperature: 5 ～ 40 ℃

Humidity: ≤ 85%

Working power supply: AC220V ± 10% 50Hz

上一条：抱歉暂无数据

下一条： PLC102 型自动馏程测定仪 PLC102 automatic d ...

[返回列表]

行业资讯 news